Goop 2Lb Coat-It Waterproof Epoxy Sealer & Protector Kit (5400040)

The Goop 2Lb Coat-It Waterproof Epoxy Sealer & Protector Kit (5400040) provides a reliable solution for safeguarding your boat’s bottom or truck bed. This gray epoxy coating is expertly formulated with a blend of materials to deliver exceptional protection and performance. It incorporates ceramic beads for enhanced resistance against abrasion, graphite to provide a smooth, low-friction surface, and Kevlar fiber for substantial structural reinforcement. This combination ensures a durable and waterproof barrier against the elements.

Goop Coat-It is engineered to protect and extend the life of various surfaces, including aluminum, fiberglass, and wood. It forms a secure, high-build coating that effectively seals small leaks and splits in a single application. Its straightforward mixing and application process makes it an accessible choice for both seasoned users and those new to epoxy coatings. Once applied, it dries quickly, providing a resilient layer that can withstand challenging conditions, helping marine vessels glide more efficiently over debris and rough surfaces.

KEY FEATURES AND BENEFITS:

• Waterproof Epoxy Sealer: Forms a superior, watertight barrier to protect surfaces from water damage and corrosion.
• Enhanced Durability: Formulated with ceramic beads for abrasion resistance, graphite for lubricity, and Kevlar fibers for exceptional toughness, ensuring a long-lasting protective layer.
• Easy Application: Simple pour, stir, and apply process makes it user-friendly, reducing complexity during use.
• Fast Curing: Sets and dries completely within 10-12 hours at typical room temperature (70°F / 21°C), allowing for quicker project completion.
• Surface Versatility: Adheres effectively to aluminum, fiberglass, and wood surfaces, offering broad application possibilities.
• Leak and Split Sealing: Capable of sealing minor leaks and splits in a single coat, providing immediate repair and protection.
• Improved Performance: The inclusion of graphite allows boats to glide more smoothly over underwater debris and rocks, potentially enhancing efficiency and reducing wear.

SPECIFICATIONS:

• Color: Gray (cures to a thick, smooth, black graphite coating)
• Kit Size: 2 lb kit
• Coverage: Approximately 20 square feet (for the 2 lb kit; varies based on surface porosity and application thickness)
• Minimum Application Temperature: 65°F (18°C)
• Application Surface Temperature Range: 50°F (10°C) to 90°F (32°C)
• Working Time (Mixed Material): Approximately 30 minutes
• Cure Time: 10-12 hours at 70°F (21°C)
• Included in Kit: Part A container of Coat-It, Part B container of Coat-It

HOW TO USE:

1. Preparation: Ensure the surface is clean and freshly sanded. Remove all contaminants such as oil, grease, dirt, and old coatings. Sand until a clean surface is achieved. For steel or aluminum boats, sand or clean with steel wool and treat with a marine phosphoric acid wash (like Naval Jelly or Aluminum Bright) to remove rust or oxidation. Fill any large gouges or deep holes with an epoxy or fairing compound before applying Coat-It. The product can be applied to dry or porous surfaces.
2. Mixing: Stir Part A of Coat-It until it has a uniform consistency. Pour the entire contents of Part B into the Part A container. Mix the entire contents thoroughly for 6-7 minutes using a fold-into-center motion, occasionally scraping the bottom and sides of the container and the mixing stick. This thorough mixing is crucial for proper results.
3. Application: Immediately pour the mixed material onto your working surface; do not leave it in the original container. Apply the mixture using a toothed trowel, squeegee, a short bristle throw-away brush, or a foam roller. You have approximately 30 minutes of working time with the mixed material.
4. Curing: Allow the applied Coat-It to cure for approximately 10-12 hours at 70°F (21°C). Note that cure time decreases with higher temperatures, and thicker coats tend to cure faster than thin ones.
5. Second Coat (Optional) & Finishing: If a second coat is desired, apply it after the initial 10-12 hour cure period. For maximum ultraviolet protection, allow Coat-It to cure thoroughly, then lightly sand the surface and apply a good grade of marine paint. Clean your tools immediately after use with acetone or lacquer thinner.

BENEFITS OF USING GOOP 2LB COAT-IT WATERPROOF EPOXY SEALER & PROTECTOR KIT (5400040):

• Provides a reliable, long-term protective barrier against water and abrasion.
• Extends the lifespan of boat hulls and truck beds by preventing wear and tear.
• Simplifies maintenance with its easy-to-mix and apply formula.
• Offers quick turnaround for projects due to its fast-drying properties.
• Enhances the overall performance of marine vessels by reducing friction.
• Creates a seamless, armored finish that resists impact and damage.
• Allows for customization with compatible marine paints for UV defense.

FEATURES:

• Engineered for use on boat bottoms and truck beds.
• Infused with ceramic, graphite, and Kevlar for performance and strength.
• Produces a high-build, thick protective coating.
• Usable in both submerged and dry environments.
• Can be sanded after curing for a smoother finish.
• Cures into a tough, dark gray graphite-like finish.
• Supports non-skid texture creation with silica sand.
• Withstands harsh environmental and chemical exposure.
• Manufactured by Eclectic Products, Inc.