Race Ramps 4.75″ Lift Show Ramps (RR-SR)

Race Ramps 4.75″ Lift Show Ramps (RR-SR) offer a quick and effective solution for elevating your vehicle’s presentation at car shows and events. Each ramp provides a 4.75-inch lift, allowing for optimal viewing of your vehicle’s undercarriage and features. Designed for convenience, these double-incline ramps are remarkably lightweight at just 5 lbs each, making them easy to transport and set up. Despite their minimal weight, they are engineered for strength, with each ramp capable of supporting up to 1,500 lbs. They are sold as a pair, accommodating tires up to 12 inches wide, and will not damage or scuff delicate display floors. This makes them a superior and safer alternative to traditional lifting methods like jack stands or wooden blocks for display purposes.

KEY FEATURES AND BENEFITS:

• Professional Display Elevation: Lifts vehicles 4.75 inches for improved viewing angles at shows and exhibitions.
• Ultra-Lightweight: Each ramp weighs only 5 lbs., making them easy to carry, transport, and store.
• High Load Capacity: Each ramp supports up to 1,500 lbs., suitable for a wide range of vehicles.
• Compact and Portable: Small footprint makes them ideal for mobile displays or events with limited space.
• Protects Display Surfaces: Will not mark or scuff garage, showroom, or event floors.
• Stable and Safe: Designed to offer secure elevation, eliminating the risk posed by unstable lifting methods.
• Flexible Use: Can be used to elevate the front, rear, or side of a vehicle based on display preference.

SPECIFICATIONS:

• Made in: USA
• Sold As: Pair
• Color: Black
• Length: 26 inches
• Width: 14 inches
• Height: 4-3/4 inches
• Weight: 5 lbs. (each ramp)
• Maximum Capacity: 1,500 lbs. (each ramp)
• Approach Angle Degree: 25°
• Maximum Tire Width: 12 inches
• Lift Height: 4-3/4 inches
• Material: Expanded foam with traction coating
• Included in Product: Set of two ramps

HOW TO USE:

1. Prepare the Surface: Ensure the display area is flat, level, and clear of any debris to ensure stability for both the ramps and the vehicle.
2. Position the Ramps: Determine which end of the vehicle you wish to lift (front, back, or side). Place one ramp directly in front of each tire you intend to elevate, ensuring they are perfectly aligned with the tires’ paths. For lifting the side of a vehicle, place one ramp in front of the front tire and one in front of the rear tire on the chosen side.
3. Drive onto Ramps: Slowly and carefully drive the vehicle onto the ramps. Proceed slowly to ensure the tires center properly on the ramps as they ascend. Stop once the tires are fully settled on the flat, elevated section of the ramps.
4. Verify Placement: Once the vehicle is in position, visually confirm that all tires are securely resting on the elevated platform of the ramps and that the vehicle feels stable.
5. For All-Around Lift (Optional): If you wish to lift the entire vehicle, acquire a second pair of Race Ramps 4.75″ Lift Show Ramps. Repeat steps 2–4 for the remaining two tires.

BENEFITS OF USING RACE RAMPS 4.75″ LIFT SHOW RAMPS (RR-SR):

• Enhanced Vehicle Presentation: Provides a professional and visually appealing lift, ideal for showcasing the vehicle’s underside, suspension, or custom modifications at car shows.
• Superior Portability: Their exceptionally light weight allows for effortless transport and setup, easily fitting into a car trunk without causing any damage.
• Floor Protection: Engineered with a smooth yet grippy coating that ensures no scratches, scuffs, or marks on garage floors, showroom floors, or any display surface.
• Improved Safety: Offers a stable and secure elevation for display purposes, eliminating the need for less stable methods like jack stands or wooden blocks.
• Versatile Application: Can be used to elevate either the front, back, or a full side of the vehicle, providing flexibility for different display preferences.
• High Strength-to-Weight Ratio: Despite their light construction, they are robust, supporting a significant amount of weight, making them suitable for a wide range of cars and light trucks.
• Proudly American-Made: Manufactured in the USA using a patented process, ensuring quality and consistent performance.

FEATURES:

• Precision Lift: Engineered to provide a precise 4.75-inch lift height for consistent vehicle elevation.
• Dual Incline Design: Features a double-incline profile for smooth and controlled ascent onto the platform.
• Patented Material Construction: Utilizes a proprietary expanded foam core with an anti-slip coating for a unique blend of light weight and robust strength.
• Tire Stop Integration: Includes a molded-in tire stop at the end of the ramp to prevent vehicles from rolling off.
• Non-Marring Base: Designed with materials that will not cause abrasions or marks on delicate floor surfaces.
• Compact Footprint: Each ramp has dimensions of 26 inches in length and 14 inches in width, allowing for easy placement and minimal space requirement.
• Weather-Resistant Coating: The rugged coating is resistant to most automotive fluids and can be used in various indoor or outdoor display environments.